Açılı Valfler

2-way pneumatically-actuated Angle Seat Valves (ASV) available in on/off and proportional control models. Optional position feedback technologies are also available.

Bu valf serisinde, conta aşınmasını telafi eden patentli teknoloji, güvenilir ve sağlam bir izolasyon sağlayarak basınçlı veya vakumlu sistemleri korur.

The RS Shut- off/ Expansion Valves were designed and built to maintain reliability both in their seating and back seating functions.

Parker's 1/2" Angle Seat Valve is actuated by a pneumatically driven piston and is capable to handle slurry solutions with particles or corrosive solutions at high temperature up to 180°C, operating pressures to 16 Bar and flow rates up to 78 l/min.

With their push-in connections, these polymer lightweight ball valves allow for a significant reduction in installation time while offering full flow capability and compact dimensions.

Kompakt, standart ve kilitlenebilir seri olarak mevcut floropolimer keçeli bu valf serisi, akışkanların aktartıldığı ve çalışma sıcaklıklarının bu keçe malzemesini gerektirdiği pek çok endüstriyel uygulamaya uygundur.

Parker's 3/4" Angle Seat Valve is actuated by a pneumatically driven piston and is capable to handle slurry solutions with particles or corrosive solutions at high temperature up to 180°C, operating pressures to 16 Bar and flow rates up to 150 l/min.

Parker’s V2 and V3, rugged, all steel bodied, tiny hand valves are designed to seat tight and permit isolation of small system components.  They are primarily used as gauge (V2) and drain (V3) valves.

Stainless steel series ball valves can withstand corrosive fluids and environments.<br/>With full flow, high pressure and temperature capabilities, these valves are suitable for many applications.

Parker's 1" Angle Seat Valve is actuated by a pneumatically driven piston and is capable to handle slurry solutions with particles or corrosive solutions at high temperature up to 180°C, operating pressures to 16 Bar and flow rates up to 267 l/min.

LIQUIfit® ball valves offer a dedicated solution to water treatment and beverages handling. These compact and reliable valves ensure sealing protection and excellent cleanliness.

Parker Legris compact needle valves can be installed in any system and are designed for applications requiring accurate leak-free fluid control and excellent service life.

Parker 3/4" 2-Way Normally Closed Angle Body Valves provide operating pressures up to 232 psi for air, inert gasses and liquids, or 130 psi for steam with flow factors up to 10.5 Cv. They can handle corrosive solutions and temperatures  up to 356 F.

Parker 1" 2-Way Normally Closed Angle Body Valves provide operating pressures up to 232 psi for air, inert gasses and liquids, or 130 psi for steam with flow factors of 18.7 Cv. They can handle corrosive solutions and temperatures  up to 356 F.

These valves are suitable for applications with pressures up to 300 bar.<br/>High performance materials and quality manufacturing allow for a wide range of operating pressures and temperatures.

Parker 1/2" 2-Way Normally Closed Angle Body Valves provide operating pressures up to 232 psi for air, inert gasses and liquids, or 130 psi for steam with flow factors of 5.5 Cv. They can handle corrosive solutions and temperatures  up to 356 F.

Parker 2" 2-Way Normally Closed Angle Body Valves provide operating pressures up to 232 psi for air, inert gasses and liquids, or 130 psi for steam with flow factors of 58.3 Cv. They can handle corrosive solutions and temperatures  up to 356 F.

Parker 1-1/2" 2-Way Normally Closed Angle Body Valves provide operating pressures up to 232 psi for air, inert gasses and liquids, or 130 psi for steam with flow factors of 37.3 Cv. They can handle corrosive solutions and temperatures  up to 356 F.

Parker's 3/8" Angle Seat Valve is actuated by a pneumatically driven piston and is capable to handle slurry solutions with particles or corrosive solutions at high temperature up to 180°C, operating pressures to 16 Bar and flow rates up to 78 l/min.

Parker's 1-1/4" Angle Seat Valve is actuated by a pneumatically driven piston and is capable to handle slurry solutions with particles or corrosive solutions at high temperature up to 180°C, operating pressures to 16 Bar and flow rates up to 400 l/min.

Parker's 1-1/2" Angle Seat Valve is actuated by a pneumatically driven piston and is capable to handle slurry solutions with particles or corrosive solutions at high temperature up to 180°C, operating pressures to 16 Bar and flow rates up to 533 l/min.

Parker's 2" Angle Seat Valve is actuated by a pneumatically driven piston and is capable to handle slurry solutions with particles or corrosive solutions at high temperature up to 180°C, operating pressures to 16 Bar and flow rates up to 833 l/min.

Parker 3/8" 2-Way Normally Closed Angle Body Valves provide operating pressures up to 232 psi for air, inert gasses and liquids, or 130 psi for steam with flow factors of 5.5 Cv. They can handle corrosive solutions and temperatures  up to 356 F.

Parker 3/4" 2-Way Normally Open Angle Body Valves provide operating pressures of 232 psi for air, inert gasses and liquids, or 130 psi for steam with flow factors up to 11.1 Cv. They can handle corrosive solutions and temperatures  up to 356 F.

Parker 1/2" 2-Way Normally Open Angle Body Valves provide operating pressures of 232 psi for air, inert gasses and liquids, or 130 psi for steam with flow factors of 5.5 Cv. They can handle corrosive solutions and temperatures  up to 356 F.

angle-valves

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Get your Parker account Today!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Create one account to manage everything you do with Parker, from your shopping preferences to your application access.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Register now</a>
	</footer>
</article>