Basınç Kontrol Valfleri

The FloCon (S)PORT/ (S)PORTII commercial evaporator pressure regulators provide tight control in a variety of applications.

Parker’s pilot operated relief valves are designed for continuous duty applications featuring great stability with low pressure drop; working with pressures up to 420 bar (6000 psi) and flows up to 400 lpm (106 gpm).

The A4 inlet family of regulators include valves that control inlet pressure. Each regulator is available with an assortment of additional variations which enable one regulator to preform several functions.

2 yönlü, kaydırarak yerleştirilen kartuş valfler serisi CE ve CP, hidrolik olarak kontrol edilen ve her uygulamada kullanılabilen yuvalı valflerdir. Bu komple modüler sistem, tüm boyutlara uygundur.

Parker’ın doğrudan harekete geçen tahliye vanaları çeşitli boşluk boyutlarında sunulur ve 420 bar’a (6000 psi) kadar basınçlar ve 200 lpm’ye (53 gpm) kadar debiler içeren sürekli çalışma uygulamaları için tasarlanmıştır.

The PVS weld-in valve stations are designed to simplify valve installation by minimizing the number of welds required for each weld group.  The PVS features up to 6 functions in a single housing.

Direkt kumandalı, sandviç tasarımlı Parker basınç azaltma valfleri serisi PRDM, hidrolik devrenin tek bir alanındaki basıncı, normal sistem basıncının altında olacak şekilde önceden belirlenmiş seviyeye getirir.

Parker’s pilot operated acting reducing & relieving valves are used in applications where specific functions require reduced and regulated pressure. Capable of flows up to 150 lpm (40 gpm) and pressures up to 380 bar (5500 psi).

The Type A4AD is a Dual Inlet Pressure Regulator capable of regulating at two different pressure set-points.

Parker’s selection of proportional pressure reducing valves are for pressure sensitive applications and are capable of flows up to 37 lpm (10 gpm) and pressures as high as 210 bar (3000 psi).

Parker digital amplifier modules series PCD00A-400 combine all necessary functions for the optimal operation of two proportional pressure/flow control valves.

Parker’s selection of proportional pressure relieving valves are for applications that require dynamic relieving and valves that are capable of flows up to 95 lpm (25 gpm) and pressures as high as 350 bar (5000 psi).

The A4A outlet family of regulators include valves that control outlet pressure. Each regulator is available with an assortment of additional variations which enable one regulator to preform several functions.

Parker’s direct acting differential area relief valves are for fast response intermittent applications and work up to 380 bar (5500 psi) and 151 lpm (40 gpm). These valves have lower leakage rates and pressure rise than standard direct acting reliefs.

The A2B products are compact pressure regulators that maintain upstream or downstream despite fluctuations in load.

Parker’s unloading pressure control valves automatically charge and maintain a specific pressure range within accumulators by loading and unloading pump flow. Usable with fixed or variable pumps and pressure of 420 bar (6000 psi) and flow up to 1 gpm.

Cross-Over Relief cartridge valves provide pressure protection to hydraulic motors, cylinders and rotary actuators up to 120 lpm (32 gpm) and 350 bar (5000 psi). Available in single or dual cartridge, in-line, manifold, or motor mount configurations.

Parker’s pilot operated pressure reducing valves are capable of flows up to 150 lpm (40 gpm) and regulating pressures up to 350 bar (5000 psi) and are commonly used for setting the pressure of a sub-circuit within a hydraulic system.

Parker PWDXXA-40* elektronik modüller serisi, konum sensörlü oransal yön kontrol vanalarının veya kapalı döngü sistemlerindeki vanaların ideal çalışması için gerekli tüm fonksiyonları bir araya getirir.

Parker’s direct acting reducing & relieving valves are used in intermittent duty applications where specific functions require reduced and regulated pressure. Capable of flows up to 56 lpm (13 gpm) and pressures up to 420 bar (6000 psi).

Parker's pilot operated pressure reducing valves series ZDR in sandwich design provide maximum flow rates up to 120l/min and enable an easy configuration of stack systems.

These A4 regulators are compact, heavy duty, pilot operated, iron alloy Outlet Pressure regulators.

The PA4 weld-in line series inlet pressure regulators are designed to overcome corrosion problems encountered in harsh environments.

Parker’s pilot operated sequence valves can be internally or externally piloted to allow multiple actuators to work in sequence based on pressure settings; working with flows up to 152 lpm (40 gpm) and pressures up to 380 bar (5500 psi).

Parker’ın alt plakaya monte edilen, pilot kumandalı basınç azaltma vanaları serisi R4R, hidrolik sistemin ikincil kısmında sabit basınç sağlar. R4R*P2 serisi, oransal solenoid kumandalı pilot kademesinde sürekli ayar yapılmasını sağlar.

Parker'ın basınç kontrol valfleri, hat içi monte akış, iğne ve çekvalf çeşitlerimizi mükemmel bir şekilde tamamlamaktadır. Bu basınç tahliye valfleri, basınçların doğru bir şekilde kontrol edilmesinin gerektiği uygulamalarda gerek duyulan ayarlanabilir basınç kontrolü ve sınırlandırma işlevleri sağlarken, tesisin sahada manüel olarak ayarlanmasına olanak sağlar. Yaygın uygulamaları, konveyörler, gıda işleme, malzeme işleme ve işlem kontrolünü içermektedir.

pressure-control-valves

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Parker hesabınızı hemen bugün edinin.</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Alışveriş tercihlerinizden uygulama erişimine kadar Parker ile ilgili yaptığınız her şeyi yönetmek için bir hesap oluşturun.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Şimdi Kaydolun</a>
	</footer>
</article>

This store is mainly accessed by Turkey users