Parker’s IntraFlow™ modular system has been developed specifically for analytical, lab and other complex general purpose instrumentation flow control systems. ISA/ANSI SP76.00.02 compliant, Parker IntraFlow™ fittings and valves provide maximum flexibility with minimal space requirements. One of the unique features is that all flow paths, regardless of direction, are maintained on a single plane within the system as there are no lower level manifold blocks required.

The compact, modular design provides contiguous fitting flow paths that are intra-connected with slip fit pressure connectors, while a threaded pegboard provides connection force and rigidity when fittings are mounted with cap screws. System assembly couldn't be simpler. All you will need is a 5/32" hex head wrench to build with Parker IntraFlow™.

Contact your local Parker Instrumentation Distributor or the Factory for a complete system design.

Markets:
• Petrochemical
• Refineries
• Power Generation
• Research


Features/Benefits:
• System size is reduced as much as 75% compared with conventionally plumbed systems, drastically      reducing panel space, internal volume and purge times
• Compliant with ISA/ANSI SP76.00.02 open architecture standards
• Complex system assembly was never easier! No tube benders or cutters required, and no welding.    All that's needed to assemble is a 5/32” hex head wrench!
• Every component on your Parker IntraFlow™ system can be reused when upgrading with emerging NeSSI Generation 2 & 3 technologies
• All flow paths are on the same plane: Parker IntraFlow™ eliminates lower level manifolds to minimize system weight and leak potentials
• Whether mounting a fitting to the standard 1/8" pegboard or a valve to the fitting, the same 10-32 x 1/2" SHCS is the only screw required


Applications:
• Process Analyzers
• Stream Switching Systems
• Analytical Equipment
• Integrators