Proflow II-E Pleated Membrane Filter Cartridge | Chemical resistance for ultra pure microelectronics liquids and gases | Product Series

Filtrar por

    No hay ningún filtro seleccionado

Opciones

Estilo

Material del tapón terminal

Longitud (pulg)

Valor de filtración (micras) (µm)

Material de la junta

Junta secundaria

Opciones especiales

Consiga su cuenta de Parker hoy mismo!

Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.


LOADING IMAGES
Proflow II-E Pleated Membrane Filter Cartridge | Chemical resistance for ultra pure microelectronics liquids and gases

Proflow II-E Pleated Membrane Filter Cartridge | Chemical resistance for ultra pure microelectronics liquids and gases

Puntos de venta

The Proflow™II-E pleated membrane filter cartridge uses a PTFE membrane along with high-purity polypropylene supports that provide an economical alternative to all-fluoropolymer filter cartridges.

Especificaciones técnicas

  • Marca: Parker
  • Industria: Microelectronics
  • Función: Clarification, Prefiltration, Polishing
  • Medio: PTFE
  • Estructura del filtro: Pleated Membrane
  • Configuración del tapón terminal: Polypropylene
  • Tipo de núcleo: Polypropylene
  • Material y estructura del refuerzo de la manguera: Polypropylene
  • Caudal: 3.2 gal/min (gpm/psid) per 10 inch Cartridge Equivalent, 7.6 gal/min (gpm/psid) per 10 inch Cartridge Equivalent, 9.1 gal/min (gpm/psid) per 10 inch Cartridge Equivalent, 1.7 gal/min (gpm/psid) per 10 inch Cartridge Equivalent, 0.8 gal/min (gpm/psid) per 10 inch Cartridge Equivalent, 0.6 gal/min (gpm/psid) per 10 inch Cartridge Equivalent
  • Diámetro exterior: 2.75 inch
Safety Warning

Descripción completa del producto

The Proflow™II-E filter cartridge uses a PTFE membrane along with high-purity polypropylene supports that provide an economical alternative to all-fluoropolymer filter cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE filter membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet-packed for quick installation and lower extractables.
Features/Benefits
• Good liquid and gas flow rates
• Wet-pack option for quick installation
• PTFE/ PP construction for chemical resistance
• Wide variety of configurations and ratings
• 100% integrity tested in cleanroom environment

Applications
• Bulk chemical delivery filtration for:
–  Acids
–  Bases
–  Solvents
–  Photochemical
• Wet etch and clean filtration for:
–  Dilute acids
–  DI water (<80°C)
• Ultrapure electronics-grade gas filtration

Documentos relacionados

Literature and Reference Materials
[CATALOG]-Filtration Products for Microelectronics Applications
[DATASHEET]-Proflow II-E Pleated Membrane Filter Cartridge
[LINECARD]-Filtration Products for Microelectronics Applications
[PRODUCT GUIDE] Filter End Caps
[PRODUCT LINECARD]-Bioscience Filtration Technology Guide
[USER GUIDE]-Proflow-II (E, G, P, Select) PTFE Membrane Filter Cartridge
Selector Guides
High-Purity Chemical Filtration Product Guide
Microelectronics Filtration Applications Interactive
×
Ver catálogos
compartir / correo electrónico
Imprimir
Productos Opciones Estilo Material del tapón terminal Longitud (pulg) Valor de filtración (micras) (µm) Material de la junta Junta secundaria Opciones especiales
34-10105-001-NN-E Standard No Insert DOE 5 0.1 None No gasket Standard
34-10110-002-11-E Standard No Insert DOE 10 0.2 EPDM 5mm thick gasket Standard
34-10110-002-41-E Standard No Insert DOE 10 0.2 Viton 5mm thick gasket Standard
34-10110-004-NN-E Standard No Insert DOE 10 0.45 None No gasket Standard
34-10110-010-41-E Standard No Insert DOE 10 1 Viton 5mm thick gasket Standard
34-10110-010-NN-E Standard No Insert DOE 10 1 None No gasket Standard
34-10130-010-41-E Standard No Insert DOE 30 1 Viton 5mm thick gasket Standard
34-10130-010-NN-E Standard No Insert DOE 30 1 None No gasket Standard
34-10140-004-NN-E Standard No Insert DOE 40 0.45 None No gasket Standard
34-10210-925-5-E Standard No Insert 226 O-Ring/Flat Cap 10 0.03 FEP Encapsulated Viton N/A Standard
34-10305-002-5-E Standard No Insert 222 O-Ring/Flat Cap 5 0.2 FEP Encapsulated Viton N/A Standard
34-10310-001-1-E Standard No Insert 222 O-Ring/Flat Cap 10 0.1 EPDM N/A Standard
34-10310-001-5-E Standard No Insert 222 O-Ring/Flat Cap 10 0.1 FEP Encapsulated Viton N/A Standard
34-10310-001-5-EW Standard No Insert 222 O-Ring/Flat Cap 10 0.1 FEP Encapsulated Viton N/A Wet Packed
34-10310-002-1-E Standard No Insert 222 O-Ring/Flat Cap 10 0.2 EPDM N/A Standard
34-10310-002-4-E Standard No Insert 222 O-Ring/Flat Cap 10 0.2 Viton N/A Standard
34-10310-002-5-E Standard No Insert 222 O-Ring/Flat Cap 10 0.2 FEP Encapsulated Viton N/A Standard
34-10310-002-5-EW Standard No Insert 222 O-Ring/Flat Cap 10 0.2 FEP Encapsulated Viton N/A Wet Packed
34-10310-004-5-E Standard No Insert 222 O-Ring/Flat Cap 10 0.45 FEP Encapsulated Viton N/A Standard
34-10310-004-5-EW Standard No Insert 222 O-Ring/Flat Cap 10 0.45 FEP Encapsulated Viton N/A Wet Packed
34-10310-004-6-E Standard No Insert 222 O-Ring/Flat Cap 10 0.45 FEP Encapsulated Silicone N/A Standard
34-10310-010-4-E Standard No Insert 222 O-Ring/Flat Cap 10 1 Viton N/A Standard
34-10310-010-5-E Standard No Insert 222 O-Ring/Flat Cap 10 1 FEP Encapsulated Viton N/A Standard
34-10310-010-5-EW Standard No Insert 222 O-Ring/Flat Cap 10 1 FEP Encapsulated Viton N/A Wet Packed
34-10310-010-6-E Standard No Insert 222 O-Ring/Flat Cap 10 1 FEP Encapsulated Silicone N/A Standard
36-10310-925-5-EW DI Flush No Insert 222 O-Ring/Flat Cap 10 0.05 FEP Encapsulated Viton N/A Wet Packed
36-10320-001-5-E DI Flush No Insert 222 O-Ring/Flat Cap 20 0.1 FEP Encapsulated Viton N/A Standard
36-10320-001-5-EW DI Flush No Insert 222 O-Ring/Flat Cap 20 0.1 FEP Encapsulated Viton N/A Wet Packed
36-10320-002-5-E DI Flush No Insert 222 O-Ring/Flat Cap 20 0.2 FEP Encapsulated Viton N/A Standard
36-10320-002-5-EW DI Flush No Insert 222 O-Ring/Flat Cap 20 0.2 FEP Encapsulated Viton N/A Wet Packed
36-10320-002-6-E DI Flush No Insert 222 O-Ring/Flat Cap 20 0.2 FEP Encapsulated Silicone N/A Standard
36-10320-004-6-E DI Flush No Insert 222 O-Ring/Flat Cap 20 0.45 FEP Encapsulated Silicone N/A Standard
36-10320-923-5-EW DI Flush No Insert 222 O-Ring/Flat Cap 20 0.03 FEP Encapsulated Viton N/A Wet Packed
36-10320-925-5-E DI Flush No Insert 222 O-Ring/Flat Cap 20 0.05 FEP Encapsulated Viton N/A Standard
36-10330-001-5-E DI Flush No Insert 222 O-Ring/Flat Cap 30 0.1 FEP Encapsulated Viton N/A Standard
36-10330-001-5-EW DI Flush No Insert 222 O-Ring/Flat Cap 30 0.1 FEP Encapsulated Viton N/A Wet Packed
36-10330-002-2-E DI Flush No Insert 222 O-Ring/Flat Cap 30 0.2 S7442 N/A Standard
36-10330-002-5-EW DI Flush No Insert 222 O-Ring/Flat Cap 30 0.2 FEP Encapsulated Viton N/A Wet Packed
36-10330-923-5-E DI Flush No Insert 222 O-Ring/Flat Cap 30 0.03 FEP Encapsulated Viton N/A Standard
36-10330-925-5-EW DI Flush No Insert 222 O-Ring/Flat Cap 30 0.05 FEP Encapsulated Viton N/A Wet Packed
36-10710-001-4-E DI Flush No Insert 226 O-Ring/Fin 10 0.1 Viton N/A Standard
36-10710-001-5-E DI Flush No Insert 226 O-Ring/Fin 10 0.1 FEP Encapsulated Viton N/A Standard
36-10710-010-5-E DI Flush No Insert 226 O-Ring/Fin 10 1 FEP Encapsulated Viton N/A Standard
36-10720-001-4-E DI Flush No Insert 226 O-Ring/Fin 20 0.1 Viton N/A Standard
36-10720-001-5-E DI Flush No Insert 226 O-Ring/Fin 20 0.1 FEP Encapsulated Viton N/A Standard
36-10810-002-4-E DI Flush No Insert 222 O-Ring/Fin 10 0.2 Viton N/A Standard
36-10810-925-5-E DI Flush No Insert 222 O-Ring/Fin 10 0.05 FEP Encapsulated Viton N/A Standard
36-A0305-001-5-E DI Flush 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 5 0.1 FEP Encapsulated Viton N/A Standard
36-A0310-001-5-EW DI Flush 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.1 FEP Encapsulated Viton N/A Wet Packed
36-A0R10-001-5-EW DI Flush 1/2" Shortened 222 Fitting 222 O-Ring/Recessed End Cap 10 0.1 FEP Encapsulated Viton N/A Wet Packed
36-A0R10-925-5-E DI Flush 1/2" Shortened 222 Fitting 222 O-Ring/Recessed End Cap 10 0.05 FEP Encapsulated Viton N/A Standard
36-A0R10-925-5-EW DI Flush 1/2" Shortened 222 Fitting 222 O-Ring/Recessed End Cap 10 0.05 FEP Encapsulated Viton N/A Wet Packed
34-10720-010-5-E Standard No Insert 226 O-Ring/Fin 20 1 FEP Encapsulated Viton N/A Standard
34-10720-010-6-E Standard No Insert 226 O-Ring/Fin 20 1 FEP Encapsulated Silicone N/A Standard
34-10730-002-2-E Standard No Insert 226 O-Ring/Fin 30 0.2 S7442 N/A Standard
34-10730-002-4-E Standard No Insert 226 O-Ring/Fin 30 0.2 Viton N/A Standard
34-10810-002-1-E Standard No Insert 222 O-Ring/Fin 10 0.2 EPDM N/A Standard
34-10810-925-5-E Standard No Insert 222 O-Ring/Fin 10 0.05 FEP Encapsulated Viton N/A Standard
34-10820-001-1-E Standard No Insert 222 O-Ring/Fin 20 0.1 EPDM N/A Standard
34-10820-002-5-E Standard No Insert 222 O-Ring/Fin 20 0.2 FEP Encapsulated Viton N/A Standard
34-10820-010-6-E Standard No Insert 222 O-Ring/Fin 20 1 FEP Encapsulated Silicone N/A Standard
34-10830-001-5-E Standard No Insert 222 O-Ring/Fin 30 0.1 FEP Encapsulated Viton N/A Standard
34-10830-002-4-E Standard No Insert 222 O-Ring/Fin 30 0.2 Viton N/A Standard
34-10830-010-5-E Standard No Insert 222 O-Ring/Fin 30 1 FEP Encapsulated Viton N/A Standard
34-10830-010-6-E Standard No Insert 222 O-Ring/Fin 30 1 FEP Encapsulated Silicone N/A Standard
34-10830-925-5-E Standard No Insert 222 O-Ring/Fin 30 0.05 FEP Encapsulated Viton N/A Standard
34-10H10-002-1-E Standard No Insert 213 O-Ring/Recessed End Cap 10 0.2 EPDM N/A Standard
34-10H20-002-1-E Standard No Insert 213 O-Ring/Recessed End Cap 20 0.2 EPDM N/A Standard
34-50310-001-5-E Standard Encapsulated Stainless Steel 222 O-Ring/Flat Cap 10 0.1 FEP Encapsulated Viton N/A Standard
34-50310-002-5-E Standard Encapsulated Stainless Steel 222 O-Ring/Flat Cap 10 0.2 FEP Encapsulated Viton N/A Standard
34-50740-002-2-EW Standard Encapsulated Stainless Steel 226 O-Ring/Fin 40 0.2 S7442 N/A Wet Packed
34-50740-002-5-EW Standard Encapsulated Stainless Steel 226 O-Ring/Fin 40 0.2 FEP Encapsulated Viton N/A Wet Packed
34-50830-001-2-EW Standard Encapsulated Stainless Steel 222 O-Ring/Fin 30 0.1 S7442 N/A Wet Packed
34-60710-002-2-E Standard Encapsulated Polysulfone 226 O-Ring/Fin 10 0.2 S7442 N/A Standard
34-60730-001-2-EW Standard Encapsulated Polysulfone 226 O-Ring/Fin 30 0.1 S7442 N/A Wet Packed
34-A0305-002-1-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 5 0.2 EPDM N/A Standard
34-A0310-001-1-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.1 EPDM N/A Standard
34-A0310-001-5-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.1 FEP Encapsulated Viton N/A Standard
34-A0310-001-5-EW Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.1 FEP Encapsulated Viton N/A Wet Packed
34-10310-925-1-E Standard No Insert 222 O-Ring/Flat Cap 10 0.05 EPDM N/A Standard
34-10310-925-5-E Standard No Insert 222 O-Ring/Flat Cap 10 0.05 FEP Encapsulated Viton N/A Standard
34-10310-925-5-EW Standard No Insert 222 O-Ring/Flat Cap 10 0.05 FEP Encapsulated Viton N/A Wet Packed
34-10320-001-1-E Standard No Insert 222 O-Ring/Flat Cap 20 0.1 EPDM N/A Standard
34-10320-001-1-EW Standard No Insert 222 O-Ring/Flat Cap 20 0.1 EPDM N/A Wet Packed
34-10320-001-2-E Standard No Insert 222 O-Ring/Flat Cap 20 0.1 S7442 N/A Standard
34-10320-001-5-E Standard No Insert 222 O-Ring/Flat Cap 20 0.1 FEP Encapsulated Viton N/A Standard
34-10320-001-5-EW Standard No Insert 222 O-Ring/Flat Cap 20 0.1 FEP Encapsulated Viton N/A Wet Packed
34-10320-002-5-E Standard No Insert 222 O-Ring/Flat Cap 20 0.2 FEP Encapsulated Viton N/A Standard
34-10320-002-5-EW Standard No Insert 222 O-Ring/Flat Cap 20 0.2 FEP Encapsulated Viton N/A Wet Packed
34-10320-004-1-E Standard No Insert 222 O-Ring/Flat Cap 20 0.45 EPDM N/A Standard
34-10320-010-4-E Standard No Insert 222 O-Ring/Flat Cap 20 1 Viton N/A Standard
34-10320-925-5-EW Standard No Insert 222 O-Ring/Flat Cap 20 0.05 FEP Encapsulated Viton N/A Wet Packed
34-10330-001-1-E Standard No Insert 222 O-Ring/Flat Cap 30 0.1 EPDM N/A Standard
34-10330-001-1-EW Standard No Insert 222 O-Ring/Flat Cap 30 0.1 EPDM N/A Wet Packed
34-10330-001-5-E Standard No Insert 222 O-Ring/Flat Cap 30 0.1 FEP Encapsulated Viton N/A Standard
34-10330-002-5-E Standard No Insert 222 O-Ring/Flat Cap 30 0.2 FEP Encapsulated Viton N/A Standard
34-10330-002-5-EW Standard No Insert 222 O-Ring/Flat Cap 30 0.2 FEP Encapsulated Viton N/A Wet Packed
34-10330-923-5-E Standard No Insert 222 O-Ring/Flat Cap 30 0.03 FEP Encapsulated Viton N/A Standard
34-10330-923-5-EW Standard No Insert 222 O-Ring/Flat Cap 30 0.03 FEP Encapsulated Viton N/A Wet Packed
34-10330-925-5-E Standard No Insert 222 O-Ring/Flat Cap 30 0.05 FEP Encapsulated Viton N/A Standard
34-10610-002-1-E Standard No Insert 020 Internal O-Ring/Flat Cap 10 0.2 EPDM N/A Standard
34-10620-002-1-E Standard No Insert 020 Internal O-Ring/Flat Cap 20 0.2 EPDM N/A Standard
34-10710-002-5-E Standard No Insert 226 O-Ring/Fin 10 0.2 FEP Encapsulated Viton N/A Standard
34-10710-010-5-E Standard No Insert 226 O-Ring/Fin 10 1 FEP Encapsulated Viton N/A Standard
34-10720-002-4-E Standard No Insert 226 O-Ring/Fin 20 0.2 Viton N/A Standard
34-10720-002-5-E Standard No Insert 226 O-Ring/Fin 20 0.2 FEP Encapsulated Viton N/A Standard
34-A0310-002-4-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.2 Viton N/A Standard
34-A0310-002-5-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.2 FEP Encapsulated Viton N/A Standard
34-A0310-004-5-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.45 FEP Encapsulated Viton N/A Standard
34-A0310-010-5-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 1 FEP Encapsulated Viton N/A Standard
34-A0310-923-5-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.03 FEP Encapsulated Viton N/A Standard
34-A0310-923-5-EW Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.03 FEP Encapsulated Viton N/A Wet Packed
34-A0310-923-K-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.03 Kalrez N/A Standard
34-A0310-925-5-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.05 FEP Encapsulated Viton N/A Standard
34-A0310-925-5-EW Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.05 FEP Encapsulated Viton N/A Wet Packed
34-A0320-001-K-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 20 0.1 Kalrez N/A Standard
34-A0320-002-5-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 20 0.2 FEP Encapsulated Viton N/A Standard
34-A0320-002-5-EW Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 20 0.2 FEP Encapsulated Viton N/A Wet Packed
34-A0320-002-K-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 20 0.2 Kalrez N/A Standard
34-A0320-004-5-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 20 0.45 FEP Encapsulated Viton N/A Standard
34-A0320-010-5-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 20 1 FEP Encapsulated Viton N/A Standard
34-A0320-925-5-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 20 0.05 FEP Encapsulated Viton N/A Standard
34-A0330-002-5-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 30 0.2 FEP Encapsulated Viton N/A Standard
34-A0330-010-5-E Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 30 1 FEP Encapsulated Viton N/A Standard
36-10310-001-5-E Standard DI Flush 222 O-Ring/Flat Cap 10 0.1 FEP Encapsulated Viton N/A Standard
36-10310-001-5-EW DI Flush No Insert 222 O-Ring/Flat Cap 10 0.1 FEP Encapsulated Viton N/A Wet Packed
36-10310-002-4-E DI Flush No Insert 222 O-Ring/Flat Cap 10 0.2 Viton N/A Standard
36-10310-002-5-E DI Flush No Insert 222 O-Ring/Flat Cap 10 0.2 FEP Encapsulated Viton N/A Standard
36-10310-002-6-EW DI Flush No Insert 222 O-Ring/Flat Cap 10 0.2 FEP Encapsulated Silicone N/A Wet Packed
36-10310-004-5-E DI Flush No Insert 222 O-Ring/Flat Cap 10 0.45 FEP Encapsulated Viton N/A Standard
36-10310-010-5-E DI Flush No Insert 222 O-Ring/Flat Cap 10 1 FEP Encapsulated Viton N/A Standard
36-10310-010-5-EW DI Flush No Insert 222 O-Ring/Flat Cap 10 1 FEP Encapsulated Viton N/A Wet Packed
36-10310-925-5-E DI Flush No Insert 222 O-Ring/Flat Cap 10 0.05 FEP Encapsulated Viton N/A Standard
36-A0R20-001-5-EW DI Flush 1/2" Shortened 222 Fitting 222 O-Ring/Recessed End Cap 20 0.1 FEP Encapsulated Viton N/A Wet Packed
36-A0R20-002-5-E DI Flush 1/2" Shortened 222 Fitting 222 O-Ring/Recessed End Cap 20 0.2 FEP Encapsulated Viton N/A Standard
36-A0R20-925-5-E DI Flush 1/2" Shortened 222 Fitting 222 O-Ring/Recessed End Cap 20 0.05 FEP Encapsulated Viton N/A Standard
36-A0R20-925-5-EW DI Flush 1/2" Shortened 222 Fitting 222 O-Ring/Recessed End Cap 20 0.05 FEP Encapsulated Viton N/A Wet Packed

Productos Recomendados

Close [ x ]
Full Screen
687PDC
679945