Proflow II-G Pleated Membrane Filter Cartridge | Hydrophobic PTFE membrane for gas & solvent purification | Product Series

Filtrar por

    No hay ningún filtro seleccionado

Opciones

Estilo

Material del tapón terminal

Longitud (pulg)

Valor de filtración (micras) (µm)

Material de la junta

Junta secundaria

Consiga su cuenta de Parker hoy mismo!

Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.


LOADING IMAGES
Proflow II-G Pleated Membrane Filter Cartridge | Hydrophobic PTFE membrane for gas & solvent purification

Proflow II-G Pleated Membrane Filter Cartridge | Hydrophobic PTFE membrane for gas & solvent purification

Puntos de venta

Proflow™ II-G filter cartridges provide an economic alternative for general applications where reliable gas and liquid flow rates are required.

Especificaciones técnicas

  • Marca: Parker
  • Industria: Microelectronics
  • Función: Clarification, Prefiltration, Polishing
  • Medio: PTFE
  • Estructura del filtro: Pleated Membrane
  • Diámetro exterior: 2.75 inch
  • Configuración del tapón terminal: Polypropylene
  • Tipo de núcleo: Polypropylene
  • Material y estructura del refuerzo de la manguera: Polypropylene
  • Caudal: 1.2 gal/min (gpm/psid) per 10 inch Cartridge Equivalent for 0.1 Micron, 2.5 gal/min (gpm/psid) per 10 inch Cartridge Equivalent for 0.2 Micron, 5.1 gal/min (gpm/psid) per 10 inch Cartridge Equivalent for 0.45 Micron, 6.2 gal/min (gpm/psid) per 10 inch Cartridge Equivalent for 1 Micron, 0.6 gal/min (gpm/psid) per 10 inch Cartridge Equivalent
Safety Warning

Descripción completa del producto

Proflow™ II-G filter cartridges provide an economic alternative for general applications where reliable gas and liquid flow rates are required. With 5.6 square feet of expanded PTFE membrane, Proflow II-G filter is a highly efficient hydrophobic barrier, for the production of dry gas, and will effectively purify aggressive liquids and organic solvents.
Proflow II-G cartridges are manufactured under cleanroom conditions and integrity tested before shipment to assure consistent performance and quality.
Features/Benefits
• Reliable air and liquid flow rates for effective performance
• Broad chemical compatibility enables use in many applications
• Broad range of micron ratings for user convenience
• Superior hydrophobicity for long life in vent/air applications
• Integrity tested to ensure quality

Applications
• Photoresists Filtration
• Compressed gas Filtration
• Filtration for Non-sterile venting
• Electronic grade solvent Filtration
• Hot deionized water Filtration  (less than 80°C)

Documentos relacionados

Literature and Reference Materials
Filtration Product Linecard for Industrial Applications--GL_IP_LC
[CATALOG]-Filtration Products for Microelectronics Applications
[DATASHEET]-Proflow II-G PTFE Membrane Filter Cartridge
[LINECARD]-Filtration Products for Microelectronics Applications
[PRODUCT GUIDE] Filter End Caps
[PRODUCT LINECARD]-Bioscience Filtration Technology Guide
[PRODUCT LINECARD]-Filtration Products for Industrial & Chemical Applications
[USER GUIDE]-Proflow-II (E, G, P, Select) PTFE Membrane Filter Cartridge
[USER GUIDE]-Proflow-II (LBR) PTFE Membrane Filter Cartridge
×
Ver catálogos
compartir / correo electrónico
Imprimir
Productos Opciones Estilo Material del tapón terminal Longitud (pulg) Valor de filtración (micras) (µm) Material de la junta Junta secundaria
34-10230-001-6-G Standard No Insert 226 O-Ring/Flat Cap 30 0.1 FEP Encapsulated Silicone N/A
34-10310-001-5-G Standard No Insert 222 O-Ring/Flat Cap 10 0.1 FEP Encapsulated Viton N/A
34-10320-001-5-G Standard No Insert 222 O-Ring/Flat Cap 20 0.1 FEP Encapsulated Viton N/A
34-10330-001-4-G Standard No Insert 222 O-Ring/Flat Cap 30 0.1 Viton N/A
34-10610-001-5-G Standard No Insert 020 Internal O-Ring/Flat Cap 10 0.1 FEP Encapsulated Viton N/A
34-10710-001-2-G Standard No Insert 226 O-Ring/Fin 10 0.1 S7442 N/A
34-10810-001-6-G Standard No Insert 222 O-Ring/Fin 10 0.1 FEP Encapsulated Silicone N/A
34-50310-001-2-G Standard Encapsulated Stainless Steel 222 O-Ring/Flat Cap 10 0.1 S7442 N/A
34-A0310-001-5-G Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.1 FEP Encapsulated Viton N/A
34-A0320-001-5-G Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 20 0.1 FEP Encapsulated Viton N/A
34-10010-002-21-G Standard No Insert DOE (Cuno) 10 0.2 S7442 5mm thick gaskets
34-10010-002-22-G Standard No Insert DOE (Cuno) 10 0.2 S7442 3mm thick gaskets
34-10110-002-11-G Standard No Insert DOE 10 0.2 EPDM 5mm thick gaskets
34-10110-002-21-G Standard No Insert DOE 10 0.2 S7442 5mm thick gaskets
34-10110-002-41-G Standard No Insert DOE 10 0.2 Viton 5mm thick gaskets
34-10110-002-NN-G Standard No Insert DOE 10 0.2 None No gasket
34-10310-002-1-G Standard No Insert 222 O-Ring/Flat Cap 10 0.2 EPDM N/A
34-10310-002-2-G Standard No Insert 222 O-Ring/Flat Cap 10 0.2 S7442 N/A
34-10310-002-4-G Standard No Insert 222 O-Ring/Flat Cap 10 0.2 Viton N/A
34-10310-002-5-G Standard No Insert 222 O-Ring/Flat Cap 10 0.2 FEP Encapsulated Viton N/A
34-10310-002-6-G Standard No Insert 222 O-Ring/Flat Cap 10 0.2 FEP Encapsulated Silicone N/A
34-10310-002-N-G Standard No Insert 222 O-Ring/Flat Cap 10 0.2 None N/A
34-10320-002-1-G Standard No Insert 222 O-Ring/Flat Cap 20 0.2 EPDM N/A
34-10320-002-2-G Standard No Insert 222 O-Ring/Flat Cap 20 0.2 S7442 N/A
34-10610-002-0-G Standard No Insert 020 Internal O-Ring/Flat Cap 10 0.2 Buna-N N/A
34-10710-002-2-G Standard No Insert 226 O-Ring/Fin 10 0.2 S7442 N/A
34-10710-002-4-G Standard No Insert 226 O-Ring/Fin 10 0.2 Viton N/A
34-10720-002-2-G Standard No Insert 226 O-Ring/Fin 20 0.2 S7442 N/A
34-10720-002-4-G Standard No Insert 226 O-Ring/Fin 20 0.2 Viton N/A
34-10810-002-0-G Standard No Insert 222 O-Ring/Fin 10 0.2 Buna-N N/A
34-10810-002-2-G Standard No Insert 222 O-Ring/Fin 10 0.2 S7442 N/A
34-10810-002-5-G Standard No Insert 222 O-Ring/Fin 10 0.2 FEP Encapsulated Viton N/A
34-10820-002-1-G Standard No Insert 222 O-Ring/Fin 20 0.2 EPDM N/A
34-10830-002-2-G Standard No Insert 222 O-Ring/Fin 30 0.2 S7442 N/A
34-10G20-002-2-G Standard No Insert 120 Internal/Recessed End Cap 20 0.2 S7442 N/A
34-10G30-002-1-G Standard No Insert 120 Internal/Recessed End Cap 30 0.2 EPDM N/A
34-10H10-002-1-G Standard No Insert 213 O-Ring/Recessed End Cap 10 0.2 EPDM N/A
34-10H10-002-2-G Standard No Insert 213 O-Ring/Recessed End Cap 10 0.2 S7442 N/A
34-10H10-002-4-G Standard No Insert 213 O-Ring/Recessed End Cap 10 0.2 Viton N/A
34-10H20-002-1-G Standard No Insert 213 O-Ring/Recessed End Cap 20 0.2 EPDM N/A
34-10H20-002-2-G Standard No Insert 213 O-Ring/Recessed End Cap 20 0.2 S7442 N/A
34-50220-002-2-G Standard Encapsulated Stainless Steel 226 O-Ring/Flat Cap 20 0.2 S7442 N/A
34-50310-002-0-G Standard Encapsulated Stainless Steel 222 O-Ring/Flat Cap 10 0.2 Buna-N N/A
34-50310-002-5-G Standard Encapsulated Stainless Steel 222 O-Ring/Flat Cap 10 0.2 FEP Encapsulated Viton N/A
34-50710-002-4-G Standard Encapsulated Stainless Steel 226 O-Ring/Fin 10 0.2 Viton N/A
34-50730-002-2-G Standard Encapsulated Stainless Steel 226 O-Ring/Fin 30 0.2 S7442 N/A
34-50810-002-2-G Standard Encapsulated Stainless Steel 222 O-Ring/Fin 10 0.2 S7442 N/A
34-50820-002-2-G Standard Encapsulated Stainless Steel 222 O-Ring/Fin 20 0.2 S7442 N/A
34-60310-002-2-G Standard Encapsulated Polysulfone 222 O-Ring/Flat Cap 10 0.2 S7442 N/A
34-60710-002-5-G Standard Encapsulated Polysulfone 226 O-Ring/Fin 10 0.2 FEP Encapsulated Viton N/A
34-60720-002-1-G Standard Encapsulated Polysulfone 226 O-Ring/Fin 20 0.2 EPDM N/A
34-A0310-002-5-G Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.2 FEP Encapsulated Viton N/A
34-A0320-002-5-G Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 20 0.2 FEP Encapsulated Viton N/A
34-A0330-002-5-G Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 30 0.2 FEP Encapsulated Viton N/A
34-A0R10-002-N-G Standard 1/2" Shortened 222 Fitting 222 O-Ring/Recessed End Cap 10 0.2 None N/A
34-10110-004-NN-G Standard No Insert DOE 10 0.45 None No gasket
34-10310-004-5-G Standard No Insert 222 O-Ring/Flat Cap 10 0.45 FEP Encapsulated Viton N/A
34-10710-004-2-G Standard No Insert 226 O-Ring/Fin 10 0.45 S7442 N/A
34-10810-004-2-G Standard No Insert 222 O-Ring/Fin 10 0.45 S7442 N/A
34-A0310-004-5-G Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 0.45 FEP Encapsulated Viton N/A
34-A0320-004-5-G Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 20 0.45 FEP Encapsulated Viton N/A
34-A0330-004-5-G Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 30 0.45 FEP Encapsulated Viton N/A
34-10010-010-11-G Standard No Insert DOE (Cuno) 10 1 EPDM 5mm thick gaskets
34-10110-010-11-G Standard No Insert DOE 10 1 EPDM 5mm thick gaskets
34-10120-010-41-G Standard No Insert DOE 20 1 Viton 5mm thick gaskets
34-10230-010-2-G Standard No Insert 226 O-Ring/Flat Cap 30 1 S7442 N/A
34-10320-010-4-G Standard No Insert 222 O-Ring/Flat Cap 20 1 Viton N/A
34-10320-010-6-G Standard No Insert 222 O-Ring/Flat Cap 20 1 FEP Encapsulated Silicone N/A
34-10720-010-5-G Standard No Insert 226 O-Ring/Fin 20 1 FEP Encapsulated Viton N/A
34-10810-010-5-G Standard No Insert 222 O-Ring/Fin 10 1 FEP Encapsulated Viton N/A
34-10820-010-4-G Standard No Insert 222 O-Ring/Fin 20 1 Viton N/A
34-60710-010-5-G Standard Encapsulated Polysulfone 226 O-Ring/Fin 10 1 FEP Encapsulated Viton N/A
34-A0310-010-1-G Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 1 EPDM N/A
34-A0310-010-5-G Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 10 1 FEP Encapsulated Viton N/A
34-A0330-010-5-G Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 30 1 FEP Encapsulated Viton N/A
34-10310-925-5-G Standard No Insert 222 O-Ring/Flat Cap 10 0.05 FEP Encapsulated Viton N/A
34-10320-925-5-G Standard No Insert 222 O-Ring/Flat Cap 20 0.05 FEP Encapsulated Viton N/A
34-10330-925-4-G Standard No Insert 222 O-Ring/Flat Cap 30 0.05 Viton N/A
34-A0320-925-5-G Standard 1/2" Shortened 222 Fitting 222 O-Ring/Flat Cap 20 0.05 FEP Encapsulated Viton N/A
34-A0R10-925-N-G Standard 1/2" Shortened 222 Fitting 222 O-Ring/Recessed End Cap 10 0.05 None N/A

Productos Recomendados

Close [ x ]
Full Screen
687PDC
679945