교체 엘리먼트 Spin-on - Racor | Product Series

필터 기준:

    선택한 필터 없음

지역

필터 요소 유형

나사산 크기

연결 유형

외경

높이

제품 시리즈

지금 Parker 계정을 만들어 보십시오!

계정을 만들면 구매 선호사항에서 애플리케이션 액세스에 이르는 모든 Parker 관련 정보를 관리할 수 있습니다.


LOADING IMAGES
교체 엘리먼트 Spin-on - Racor

교체 엘리먼트 Spin-on - Racor

구매처 안내

Racor 디젤 스핀온 시리즈 필터는 디젤유와 휘발유에서 먼지와 물을 확실히 제거할 수 있습니다. Aquabloc® 여과재는 최적의 물 제거 성능과 최장의 수명을 보장합니다.

기술 사양

  • 제품 시리즈: 디젤 스핀 온 FF / WS
  • 브랜드: Parts distributed by Racor USA or Racor Europe (UK) depending on product selected.
  • 미크론 정격: 98% @ 4, 10, or 30 Micron depending on product selected. More than 98% @ 4 Micron available in dual pleat (R45-sized) spin-on. μm
  • 충족된 사양: No
  • 흐름 방향: Racor replacement elements are designed to flow inside to outside, or outside to inside the media assembly. Filters with a center plunger type priming pump are always inside to out flow., Outside-to-Inside
  • 관련 부품: Racor replacement elements have an open threaded end at the bottom of the can. After part selection, an example (basic) mating bowl part number will be displayed here.

전체 제품 설명

디젤 스핀온(spin-on) 시리즈 교체용 장치

제품의 개요:

주의 1: 발행 시에는 개요가 정확합니다. 사진은 설명을 위한 것일 뿐입니다. 설명서와 기타 내용은, 제품지원(Product Support) 탭을 참조하십시오.

Racor 스핀온(spin-on) 시리즈 교체용 장치:

Racor 스핀온 교체용 장치는, 다양한 유속에 맞도록 다양한 길이와 직경으로 제공됩니다. 실크스크린은 색상 코드가 있어, 갈색은 2 미크론, 청색은 10 미크론, 적색은 30 미크론입니다. 미크론 등급이 작을수록, 더 미세한 여과를 의미합니다. 하류에 추가 여과장치가 없는 경우에는, 2 미크론 등급이 필요합니다. 전단여과(pre-filtration)에는 10 또는 30 미크론을 사용해야, 하류나 엔진 장착 필터를 보호할 수 있습니다. 최종적으로는, 선호하는 미크론 등급이 유체 품질, 가동 분위기, 및 유지보수 계획을 결정하는 하나의 요소입니다.

먼지, 슬러지, 또는 물 형태의 연료 오염물질이 연료시스템에 침투할 수 있는 경로가 항상 있습니다. 연료분사 방아쇠를 작동시킬 때마다, 엔진의 수명이 위협을 받습니다. 연료를 아무리 조심스럽게 취급 또는 보관해도, 먼지, 녹, 침전물, 조류(algae), 및 물이 유입 경로를 찾아냅니다. Racor 연료 필터 및 물 분리기는 Aquabloc® 여과재를 갖추고 있어, 물과 고형분을 효과적으로 제거하기 때문에, 엔진을 더 큰 힘과 더 큰 효율로 가동시킬 수 있습니다. 엔진의 수명을 위해서는, Racor 장착 헤드와 스핀온 Racor 연료 필터 및 물 분리기를 설치하십시오.

작용 방식:

Racor 디젤 스핀온 시리즈 필터는 Aquabloc® 여과재를 사용하기 때문에, 디젤유와 휘발유에서 먼지와 물을 확실히 제거할 수 있습니다. Aquabloc® 여과재는 접힘(pleated) 주름(corrugated) 배치되어, 최적의 물 제거 성능과 최장의 수명을 보장합니다. 필터 헤드로 유입되는 연료가 수직 여과재 주름을 통하여 하류로 흐르기 때문에, 큰 물 방울과 오염물질 입자가 수거통으로 직접 떨어집니다. 특수 처리된 여과재 표면에 작은 물 방울이 모여 합쳐지고, 크기가 충분해지면 수거통에 떨어지게 됩니다. 작은 오염물질 입자는 Aquabloc® 여과재 표면에서 정지되지만, 더 작은 입자는 여과재 층의 더 깊은 곳에서 포착됩니다. 그 결과, 최상의 무수 청정 연료가 엔진에 공급됩니다.

특성:

이 연료 필터 및 물 분리기는, 높은 성능을 위하여 설계되었으며, 청정한 무수 연료로 최고의 엔진 성능을 제공합니다. 이 필터 본체는 내구성 있는 정전기 분체도장으로 보호되어, 우수한 내부식성을 가지고 있습니다. 이 스핀온 필터 설계는 서비스가 쉽고, 재사용 가능한 청정 가공 플라스틱 용기는 자동배출장치를 갖추고 있어 원치 않는 찌꺼기와 물을 배출합니다.

• 큰 오염물질 포착용량의 교체용 장치는 긴 수명을 보장합니다.
• 내식성 도장 및 구조
• Aquabloc® 여과재가 표준형입니다.
• 가스켓과 O-링 재질은 디젤유나 휘발유를 사용하도록 설계되었습니다.
• Parker의 세계적인 지원 및 분배 통신망은, 고객이 전세계의 어디에 있든 당사의 제품을 구할 수 있도록 지원합니다.
• 제품이 ISO TS 16949 품질시스템 환경으로 ISO 14001 환경요건을 준수하여 제작되었습니다.
• 주의: 휘발유 시스템의 투명 용기는 일상적 점검 항목이기 때문에, 손상, 변형, 변색 여부를 검사해야 하며, 필요 시 교체해야 합니다.

올바른 연료필터 선택방법:

1. 필터와 맞는 Racor 시리즈를 선택하십시오.

2. Aquabloc® 여과재의 미크론 등급을 선택하십시오. 일차 적용으로는 10 및 30 미크론 장치가 권장되며, 이차 또는 마지막 필터로는 2 미크론 장치가 권장됩니다.

3. 높이와 직경으로 선택할 수 있습니다.

적용:

• 발전
• 포장 및 비포장 도로
• 트럭 및 버스
• 건설
• 농업
• 모든 엔진연료 여과

관련 문서

Literature and Reference Materials
Parker Racor--Changing Filtation--FDRB583UK
Support Asset Library (Europe) - Racor Spin-on Series
Support Asset Library (US) - Racor Spin-on Series
×
카탈로그보기
공유 / 이메일
출력
제품 지역 필터 요소 유형 나사산 크기 연결 유형 외경 높이 제품 시리즈
R12S North America and EMEA regions 2 Micron Aquabloc® Spin-on M18 x 1.5 2.4" Male Bottom Threads 3.0" (76 mm) 2.4" (61 mm) 120A, 140R
R12T North America and EMEA regions 10 Micron Aquabloc® Spin-on M18 x 1.5 2.4" Male Bottom Threads 3.0" (76 mm) 2.4" (61 mm) 120A, 140R
R12P North America and EMEA regions 30 Micron Aquabloc® Spin-on M18 x 1.5 2.4" Male Bottom Threads 3.0" (76 mm) 2.4" (61 mm) 120A, 140R
R15S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1"-12 3.125" Female Bottom Threads 3.8" (97 mm) 3.3" (84 mm) 215R
R15T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-12 3.125" Female Bottom Threads 3.8" (97 mm) 3.3" (84 mm) 215R
R15P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-12 3.125" Female Bottom Threads 3.8" (97 mm) 3.3" (84 mm) 215R
R20S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1"-14 3.125" Female Bottom Threads 3.8" (97 mm) 4.0" (102 mm) 230R
R20T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-14 3.125" Female Bottom Threads 3.8" (97 mm) 4.0" (102 mm) 230R
R20P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 3.125" Female Bottom Threads 3.8" (97 mm) 4.0" (102 mm) 230R
R24S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1"-14 1.25" Female Bottom Threads 3.8" (97 mm) 3.5" (89 mm) 220R Center Thread Bowl
R24T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-14 1.25" Female Bottom Threads 3.8" (97 mm) 3.5" (89 mm) 220R Center Thread Bowl
R24P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 1.25" Female Bottom Threads 3.8" (97 mm) 3.5" (89 mm) 220R Center Thread Bowl
R25S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1"-14 3.125" Female Bottom Threads 3.8" (97 mm) 5.5" (140 mm) 245R
R25T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-14 3.125" Female Bottom Threads 3.8" (97 mm) 5.5" (140 mm) 245R
R25P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 3.125" Female Bottom Threads 3.8" (97 mm) 5.5" (140 mm) 245R
R26S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1"-14 1.25" Female Bottom Threads 3.8" (97 mm) 4.7" (119 mm) 225R Center Thread Bowl
R26T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-14 1.25" Female Bottom Threads 3.8" (97 mm) 4.7" (119 mm) 225R Center Thread Bowl
R26P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 1.25" Female Bottom Threads 3.8" (97 mm) 4.7" (119 mm) 225R Center Thread Bowl
S3238 North America and EMEA regions 10 Micron Aquabloc® Spin-on 1-1/4"-12 3.75" Female Bottom Threads 5.1" (130 mm) 6.3" (160 mm) 3150R
S3238P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1-1/4"-12 3.75" Female Bottom Threads 5.1" (130 mm) 6.3" (160 mm) 3150R
S3207S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1-1/4"-12 3.75" Female Bottom Threads 5.1" (130 mm) 9.9" (252 mm) 3250R
S3207T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1-1/4"-12 3.75" Female Bottom Threads 5.1" (130 mm) 9.9" (252 mm) 3250R
S3207P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1-1/4"-12 3.75" Female Bottom Threads 5.1" (130 mm) 9.9" (252 mm) 3250R
S3226S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.4" (112 mm) 6.3" (160 mm) 330R
S3226T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.4" (112 mm) 6.3" (160 mm) 330R
S3226P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.4" (112 mm) 6.3" (160 mm) 330R
R125S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.4" (112 mm) 8.6" (218 mm) 7125R, 6125R, 4125R
R125T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.4" (112 mm) 8.6" (218 mm) 7125R, 6125R, 4125R
R125P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.4" (112 mm) 8.6" (218 mm) 7125R, 6125R, 4125R
R45S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.4" (112 mm) 3.4" (86 mm) 745R, 645R, 445R, 345RC
R45T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.4" (112 mm) 3.4" (86 mm) 745R, 645R, 445R, 345RC
R45P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.4" (112 mm) 3.4" (86 mm) 745R, 645R, 445R, 345RC
R60S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.4" (112 mm) 5.1" (130 mm) 760R, 660R, 460R, 360RC
R60T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.4" (112 mm) 5.1" (130 mm) 760R, 660R, 460R, 360RC
R60P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.4" (112 mm) 5.1" (130 mm) 760R, 660R, 460R, 360RC
R120S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.4" (112 mm) 8.6" (218 mm) 4120R, 6120R
R120T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.4" (112 mm) 8.6" (218 mm) 4120R, 6120R
R120P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.4" (112 mm) 8.6" (218 mm) 4120R, 6120R
R90S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.4" (112 mm) 6.1" (155 mm) 790R, 690R, 490R, 390RC
R90T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.4" (112 mm) 6.1" (155 mm) 790R, 690R, 490R, 390RC
R90P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.4" (112 mm) 6.1" (155 mm) 790R, 690R, 490R, 390RC
R160P EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 8.6" (218 mm) 4160R
R160T EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 8.3" (210 mm) 4160R
R160G EMEA region only 20 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 8.3" (210 mm) 4160R
R100RDRCR01 EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 7.5" (191 mm) Aftermarket Interchange
R160-D-RCR-01 EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 8.3" (210 mm) Aftermarket Interchange
R160-D-RCR-02 EMEA region only 20 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 8.3" (210 mm) Aftermarket Interchange
R260P EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 3.7" (94 mm) 5.5" (140 mm) 260
R260T EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 3.7" (94 mm) 5.5" (140 mm) 260
R60P-D-MAX EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 5.1" (130 mm) 400 Heated Head
R90P-D-MAX EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 5.7" (144 mm) 400 Heated Head
R60T-D-MAX EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 5.1" (130 mm) 400 Heated Head
R90T-D-MAX EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 5.7" (144 mm) 400 Heated Head
R60RDRCR01 EMEA region only 20 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 5.1" (130 mm) Aftermarket Interchange
R90RDRCR01 EMEA region only 20 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 6.3" (160 mm) Aftermarket Interchange
R60RDRCR02 EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 5.1" (130 mm) Aftermarket Interchange
R90RDRCR02 EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 6.3" (160 mm) Aftermarket Interchange
R90G-D-MAX EMEA region only 20 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 6.5" (166 mm) Aftermarket Interchange
R52S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.3" (109 mm) 3.0" (76 mm) 152
R52T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.3" (109 mm) 3.0" (76 mm) 152
R52P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.3" (109 mm) 3.0" (76 mm) 152
RC-381 EMEA region only 5 micron Secondary Element M24 x 1.5 No Bowl Connection 3.7" (94 mm) 5.8" (147 mm) Aftermarket Interchange
RS175RCR01 EMEA region only 4 Micron Secondary Element M32 x 1.5 No Bowl Connection 4.3" (109 mm) 6.5" (166 mm) Engine Spin-on Series
R160-D-RCR-01-BP240 EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) Aftermarket Interchange
R160-D-RCR-02-BP240 EMEA region only 20 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) Aftermarket Interchange
R260P-BP420 EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 3.7" (94 mm) 260
R60RDRCR01-BP360 EMEA region only 20 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) Aftermarket Interchange
R60RDRCR02-BP360 EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) Aftermarket Interchange
R90RDRCR01-BP300 EMEA region only 20 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) Aftermarket Interchange
R90RDRCR02-BP300 EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) Aftermarket Interchange
R90T-D-MAX-BP300 EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 400 Heated Head
RS175RCR01-BP300 EMEA region only 4 Micron Secondary Element M32 x 1.5 No Bowl Connection 4.3" (109 mm) Engine Spin-on Series
RS175RCR03-BP300 EMEA region only 4 Micron Secondary Element M32 x 1.5 No Bowl Connection 4.3" (109 mm) Engine Spin-on Series
RS250RCR01-BP240 EMEA region only 4 Micron Secondary Element M32 x 1.5 No Bowl Connection 4.3" (109 mm) Engine Spin-on Series
S3201P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 3.125" Female Bottom Threads 3.8" (97 mm) 7.5" (191 mm) Engine Spin-on Series
S3201T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-14 3.125" Female Bottom Threads 3.8" (97 mm) 7.5" (191 mm) Engine Spin-on Series
S3202 North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-12 3.125" Female Bottom Threads 3.8" (97 mm) 7.4" (188 mm) Engine Spin-on Series
S3202T North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-12 3.125" Female Bottom Threads 3.8" (97 mm) 7.4" (188 mm) Engine Spin-on Series
S3203 North America and EMEA regions 2 Micron Aquabloc® Spin-on 1"-14 3.125" Female Bottom Threads 3.8" (97 mm) 5.5" (140 mm) Engine Spin-on Series
S3204P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 3.125" Female Bottom Threads 3.8" (97 mm) 4.0" (102 mm) Engine Spin-on Series
S3204S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1"-14 3.125" Female Bottom Threads 3.8" (97 mm) 4.0" (102 mm) Engine Spin-on Series
S3208P North America and EMEA regions 30 Micron Aquabloc® Spin-on M16 x 1.5 2.4" Male Bottom Threads 3.0" (76 mm) 5.25" (133 mm) Engine Spin-on Series
S3208S North America and EMEA regions 2 Micron Aquabloc® Spin-on M16 x 1.5 2.4" Male Bottom Threads 3.0" (76 mm) 5.25" (133 mm) Engine Spin-on Series
S3208T North America and EMEA regions 10 Micron Aquabloc® Spin-on M16 x 1.5 2.4" Male Bottom Threads 3.0" (76 mm) 5.25" (133 mm) Engine Spin-on Series
S3209P North America and EMEA regions 30 Micron Aquabloc® Spin-on M16 x 1.5 3.125" Female Bottom Threads 3.8" (97 mm) 5.5" (140 mm) Engine Spin-on Series
S3209S North America and EMEA regions 2 Micron Aquabloc® Spin-on M16 x 1.5 3.125" Female Bottom Threads 3.8" (97 mm) 5.5" (140 mm) Engine Spin-on Series
S3209T North America and EMEA regions 10 Micron Aquabloc® Spin-on M16 x 1.5 3.125" Female Bottom Threads 3.8" (97 mm) 5.5" (140 mm) Engine Spin-on Series
S3212 North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-12 3.125" Female Bottom Threads 3.8" (97 mm) 4.0" (102 mm) Engine Spin-on Series
S3222 North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 3.125" Female Bottom Threads 3.8" (97 mm) 7.4" (188 mm) Engine Spin-on Series
S3225P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.4" (112 mm) 5.1" (130 mm) 325 Series
S3229 North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-12 3.75" Female Bottom Threads 3.8" (97 mm) 7.4" (188 mm) Engine Spin-on Series
S3230P North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 3.8" (97 mm) 5.5" (140 mm) Engine Spin-on Series
S6464 North America and EMEA regions Screen Pre-Filter Spin-on 1"-14 3.75" Female Bottom Threads 4.4" (112 mm) 6.3" (160 mm) Nautilus Series
B160P EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.2" (107 mm) 8.5" (216 mm) Engine Spin-on Series
B160T EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.2" (107 mm) 8.5" (216 mm) Engine Spin-on Series
PFF5605 EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.2" (107 mm) 8.0" (204 mm) Engine Spin-on Series
PFF5674 EMEA region only 5 micron Secondary Element M16 x 1.5 No Bowl Connection 3.0" (76 mm) 6.1" (155 mm) Engine Spin-on Series
PFF5675 EMEA region only 4 Micron Secondary Element 1"-14 No Bowl Connection 3.7" (94 mm) 10.5" (267 mm) Engine Spin-on Series
PFF5676 EMEA region only 4 Micron Secondary Element M18 x 1.5 No Bowl Connection 3.7" (94 mm) 8.1" (206 mm) Engine Spin-on Series
PFF5678 EMEA region only 5 micron Secondary Element M16 x 1.5 No Bowl Connection 3.7" (94 mm) 5.4" (137 mm) Engine Spin-on Series
PFF5679 EMEA region only 5 micron Secondary Element 1"-14 No Bowl Connection 3.7" (94 mm) 5.4" (137 mm) Engine Spin-on Series
PFF5680 EMEA region only 4 Micron Secondary Element M16 x 1.5 No Bowl Connection 3.0" (76 mm) 4.8" (122 mm) Engine Spin-on Series
PFF6635 EMEA region only 4 Micron Secondary Element M16 x 1.5 No Bowl Connection 3.7" (94 mm) 8.1" (206 mm) Engine Spin-on Series
PFF6636 EMEA region only 10 Micron Secondary Element M20 x 1.5 No Bowl Connection 3.7" (94 mm) 7.1" (181 mm) Engine Spin-on Series
R120-10MB-AQII EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 8.5" (216 mm) Engine Spin-on Series
R120S-HD EMEA region only 2 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 8.5" (216 mm) Engine Spin-on Series
R160-3D-RCR-01 EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 8.5" (216 mm) Engine Spin-on Series
R160P-D-MAX EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 8.5" (216 mm) Engine Spin-on Series
R160T-D-MAX EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 8.5" (216 mm) Engine Spin-on Series
R270PL EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 4.3" (109 mm) 5.9" (150 mm) Engine Spin-on Series
R315TDRCR01 EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.125" Female Bottom Threads 3.7" (94 mm) 3.3" (84 mm) Engine Spin-on Series
R420PL EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 4.3" (109 mm) 9.1" (231 mm) Engine Spin-on Series
R60S-D-MAX EMEA region only 2 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 5.1" (130 mm) Engine Spin-on Series
R90-3D-RCR-01 EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 6.2" (157 mm) 4.4" (112 mm) Engine Spin-on Series
R90-D-RCR-01 EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 8.5" (216 mm) Engine Spin-on Series
R90-DS-RAC-01 EMEA region only 2 Micron Secondary Element 1"-14 No Bowl Connection 4.3" (109 mm) 5.8" (147 mm) Engine Spin-on Series
R90P-UK EMEA region only 30 Micron Aquabloc® Spin-on 1"-14 3.75" Male Bottom Threads 4.3" (109 mm) 5.7" (144 mm) Engine Spin-on Series
RS175RCR03 EMEA region only 4 Micron Secondary Element M32 x 1.5 No Bowl Connection 4.3" (109 mm) 6.5" (166 mm) Engine Spin-on Series
RS250RCR01 EMEA region only 4 Micron Secondary Element M32 x 1.5 No Bowl Connection 4.3" (109 mm) 8.9" (226mm) Engine Spin-on Series
RS250RCR02 EMEA region only 4 Micron Secondary element M32 x 1.5 No Bowl Connection 4.2" (107 mm) 10.3" (262 mm) Engine Spin-on Series
RS250RCR03 EMEA region only 4 Micron Secondary element M32 x 1.5 No Bowl Connection 4.3" (109 mm) 8.9" (226mm) Engine Spin-on Series
R90DCM North America and EMEA regions Depth Coalescing Aquabloc® Synergy Spin-on 1""-14 3.75"" Male Bottom Threads 4.4"" (112 mm) 6.1"" (155 mm) 790R, 690R, 490R, 390RC
R90-D-RCR-01-BP240 EMEA region only 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.3" (109 mm) 8.5" (216 mm) Engine Spin-on Series
B32012 North America and EMEA regions 30 Micron Aquabloc® Spin-on 1"-12 3.125" Female Bottom Threads 3.8" (97 mm) 7.4" (188 mm) Engine Spin-on Series
B32016S North America and EMEA regions 2 Micron Aquabloc® Spin-on with Bowl M16 x 1.5 2.4" Male Bottom Threads 3.0" (76 mm) 5.9" (150 mm) Engine Spin-on Series
R120-DDC North America and EMEA regions 10 Micron Aquabloc® Spin-on 1"-14 3.75" Female Bottom Threads 4.4" (112 mm) 8.6" (218 mm) 6120R, 4120R Series
R13P North America and EMEA regions 30 Micron Aquabloc® Spin-on M18 x 1.5 2.4" Male Bottom Threads 3.0" (76 mm) 3.5" (89 mm) 120B Series
R13S North America and EMEA regions 2 Micron Aquabloc® Spin-on M18 x 1.5 2.4" Male Bottom Threads 3.0" (76 mm) 3.5" (89 mm) 120B Series
R13T North America and EMEA regions 10 Micron Aquabloc® Spin-on M18 x 1.5 2.4" Male Bottom Threads 3.0" (76 mm) 3.5" (89 mm) 120B Series
S3201S North America and EMEA regions 2 Micron Aquabloc® Spin-on 1”-14 3.125" Female Bottom Threads 3.8" in. (97 mm) 7.4" (188 mm) Engine Spin-on Series
S3206 North America and EMEA regions 2 Micron Aquabloc® Spin-on 1”-14 3.75" Female Bottom Threads 4.38" (111 mm) 8.5 in. (216 cm) Engine Spin-on Series
S6484 North America and EMEA regions Cold Weather Water Separater 1"-12 3.125" Female Bottom Threads 3.8" (97 mm) 4.0" (102 mm) Engine Spin-on Series

추천 상품

Close [ x ]
Full Screen
687611
687630